Polycom KIRK KWS8000 User Manual
Page 13
Advertising
Polycom KIRK Wireless Server 8000 Installation Guide
1–10
Figure 1-6
Installing Interface cards
2
Plug the interface cables into the card as described in
To Install CPU Cards
1
Ensure that the KWS8000 is powered off completely.
2
With two hands, gently slide the card into the unit. Give the card a gentle
push on the last centimeter so that it enters the backplane connector
properly.
Avoid pushing on the front connectors - push only on the plastic parts at
the top and bottom.
Advertising