NuTone Video Door Answering System VSUC4RK - Manual (Page 14)

Connecting Camera 1 at the TV/Monitor
1. Strip approx 2" of outer protective jacket from the category 5 or category 6 cable.
2. Separate and strip approx. 1/2" of insulation from each of the eight wires in the cable. Twist the following cables
together:
• OR and OR/WH
• GR and GR/WH
• BL and BL/WH
• BR and BR/WH
3. Attach each of the twisted pair of wires to the corresponding Camera 1 screw terminals on the back of the TV/Monitor.
Tighten each screw securely.
Connecting Optional Camera 2 at the TV/Monitor
If an optional second camera has been installed, use the following connection procedure.
1. Strip approx 2" of outer protective jacket from the category 5 or category 6 cable.
2. Separate and strip approx. 1/2" of insulation from each of the eight wires in the cable. Twist the following cables
together:
• OR and OR/WH
• GR and GR/WH
• BL and BL/WH
• BR and BR/WH
3. Attach each of the twisted pair of wires to the corresponding Camera 2 screw terminals on the back of the
TV/Monitor. Tighten each screw securely.
14