F 19 – Nikon AW100 User Manual
Page 233
F19
Troubleshooting
Te
chni
cal
Not
e
s an
d In
de
x
GPS
Problem
Cause/Solution
A
Unable to identify
the location or it
takes time to
identify the
location.
• The camera may not be able to identify the location in
some shooting environments. To use the GPS feature, use
the camera as much as possible in an open-air area.
• When positioning for the first time, when positioning was
unable to be performed for about two hours, or after the
battery was changed, it takes a few minutes to obtain the
positioning information.
Unable to record
position
information on
shot images.
When z or y is displayed on the shooting screen, the
position information is not recorded. Before shooting
pictures, make sure that the camera is receiving a GPS signal
at sufficient strength.
Difference
between the
actual shooting
location and
recorded position
information.
The acquired position information may deviate in some
shooting environments. When there is a significant
difference in the signals from the GPS satellite, there could
be a deviation of up to several hundred meters.
An incorrect
location name is
recorded or the
correct location
name is not
displayed.
The desired landmark name is not registered or an incorrect
landmark name is displayed.
–
Unable to update
the A-GPS file.
• Check the following items.
- Whether the memory card is inserted
- Whether the A-GPS file is stored in the memory card
- Whether the A-GPS file saved in a memory card is more
recent than the A-GPS file saved in the camera
- Whether the A-GPS file is still valid
• The A-GPS file may be corrupted. Download the file from
the website once more.
–
Unable to save log
data.
• Be sure that a memory card is inserted in the camera.
• Up to 36 log data events can be recorded in a day.
• Up to 100 log data events can be stored on a single
memory card. Delete log data that is no longer required
from a memory card or replace the memory card with a
new one.
–
–
E63