Nikon 4.2 - Manual (Page 72)

70
Macintosh
Before installing Nikon Capture 4
Before installing Nikon Capture 4:
• Uninstall any earlier versions of Nikon Capture.
• Nikon Capture 4 version 4.2 can be used with either PictureProject or the latest version of Nikon View.
For information on the latest Nikon software, visit the websites listed on page 2 of the Nikon Capture 4
User’s Manual.
• Exit all applications, including any virus-checking software that may be running.
Before Starting Nikon Capture 4 Camera Control (D2-series / D100/D70 Only)
If you are using a D2-series, D100 or D70 digital camera, set the USB option in the cam era setup menu
to PTP before starting Nikon Capture 4 Camera Control.
Mac OS X
The ad min is tra tor password is required when installing Nikon Capture 4 under Mac OS X.
Installing Nikon Capture 4 on a Macintosh
Before installing Nikon Capture 4, make sure that your computer meets the following system
re quire ments.
OS Mac OS 9.0.4–9.2.2*, Mac OS X (ver sion 10.1.5 or later)
Model Built-in USB or FireWire port required
RAM
• Mac OS X: 256 MB (768 MB or more recommended)
• Mac OS 9: memory allocation of 64 MB or more to Nikon Capture 4 Camera
Control, 512 MB or more to Nikon Capture 4 Editor
Hard-disk space 200 MB required for installation
Video
resolution
800
× 600 pixels or more with 16-bit color (High Color/thousands of colors). 24-
bit color (True Color/millions of colors) recommended.
In ter face
Fire
Wire †
Built-in FireWire interface re quired for connection to D1, D1
X
, and D1
H
USB **
• Built-in USB interface
• RATOC REX-PCIU3U USB interface board (USB 2.0; for use only with D2-series
under Mac OS X)
Supported cameras
(Camera Control)
D2-series, D1-series, D100 †† , and D70
Other
• CD-ROM drive required for installation.
• Internet connection required for some options.
* With CarbonLib version 1.6 or later.
† The camera may not function as expected when connected to an FireWire hub.
** The camera may not function as expected when connected to a USB hub or keyboard.
†† Camera fi rmware version 2.00 or later.