Olympus DS-333 - Manual (Page 29)

29
Alarm Playback Function (ALARM)
7 Press the REC/SET button to
complete the setup screen.
When you choose ON, the hour
indicator flashes.
When you choose OFF, the alarm
indicator disappears and finishes with
Step 12.
8 Press the FF/+ or REW/– button
to set the hour.
9 Press the REC/SET button to
accept the hour.
The minute indicator flashes.
10 Press the FF/+ or REW/– button
to set the minute.
11 Press the REC/SET button to
accept the minute.
12 Press the STOP button to close
the menu.
An alarm tone will sound at the scheduled time. Press any button
while the alarm sounds to play the file you associated with the alarm.
A L A R M A L A R M
A M 1 2 : 5 8
A M 1 2 : 5 8 8,10
12
7,9,11
······················································································································································
Notes
• The alarm playback function can be set for only one file at a time.
• The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared.
• If you wish to change the file for alarm play, first turn the alarm settings “OFF”, then make any desired new
alarm settings.
• The alarm will sound for 5 minutes and then stop.
• If you are using the recorder at the scheduled time, the alarm will sound after you’re done.
• The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the
file associated with the alarm when you press any button.
• The alarm playback setting is cleared if the selected file is erased.
A L A R M A L A R M
A M 1 2 : 5 8
A M 1 2 : 5 8