Connections, Signal flow – Onkyo TX-SR601E User Manual

Page 18

Advertising
background image

18

Connections

Connecting a DVD Player with 2-Channel (L/R) Audio Output

4. Connecting a DVD player (DVD)
Using an RCA video cable, connect the video output jack
(composite) of the DVD player to the DVD V IN jack of the TX-
SR701/701E/601/601E. Or if the DVD player has an S video output
jack, connect it to the DVD S IN jack with an S video cable. Or if
the device has component video outputs, connect them to the
COMPONENT VIDEO INPUT 1 or 2 jacks on the TX-SR701/
701E/601/601E.

With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for the COMPONENT VIDEO INPUT
1 jacks.
If you connect the DVD player to the COMPONENT VIDEO
INPUT 2 jacks, this must be changed at “Input Setup”

“Component Video” (see page 53).

Using an RCA audio connection cable, connect the audio output
jacks of the DVD player to the DVD FRONT L/R jacks of the TX-
SR701/701E/601/601E. Make sure that you properly connect the
left channel to the L jack and the right channel to the R jack.

If the device has a 5.1-channel output, connect the DVD FRONT L/
R, SURR L/R, CENTER, and SUBWOOFER (5.1-channel input)
jacks of the TX-SR701/701E/601/601E to the 5.1-channel output
jacks of the DVD player. Make sure that you properly connect the
left channels to the L jacks and the right channels to the R jacks.

If the device has a digital output, connect it to either the DIGITAL
IN COAXIAL jack or the DIGITAL IN OPTICAL jack of the TX-
SR701/701E/601/601E depending on the type of connector on the
DVD player.

With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for digital input at the OPTICAL 1 jack
(OPT 1).
If the digital connection is made at a different jack, this must be
changed at “Input Setup”

→ “Digital Input” (see page 52).

Note:
If the DVD player has both 5.1-channel audio outputs and 2-
channel audio outputs, and you want to connect the DVD player
only using the FRONT L/R jacks on the TX-SR701/701E/601/
601E, use the 2-channel audio output jacks on the DVD player.

INPUT 1

INPUT 2

OUTPUT

COMPONENT VIDEO

Y

OPTICAL

1

2

IN

IN

IN

IN

FRONT

SURR

CENTER

SUB

WOOFER

VIDEO 2

VIDEO 1

VIDEO 2

DVD

MONITOR

OUT

DVD

TAPE

IN

L

R

VIDEO 3

VIDEO 1

V

VIDEO 3

OPTICAL

IN

IN

IN

IN

IN

IN

OUT

OUT

OUT

OUT

OUT

S

DIGITAL

OUT

CD

COAXIAL

L

R

IN

GND

PHONO

COAXIAL

P

R

P

B

12 V

TRIGG

OUT

ZONE 2

IR IN

12 V

TRIGG

OUT

ANTENNA

FM 75

AM

REMOTE
CONTROL

R

L

ZONE 2

LINE OUT

: Signal flow

4. DVD player (DVD)

Component video output

Video output

S video output

R (red)

L (white)

Analog audio output

Digital audio output
(optical)

Advertising
This manual is related to the following products: