Olympus MR-500i - Manual (Page 92)

92
Pr
inting phot
os
Printing with a PictBridge-compatible printer
Changing the paper settings
You can change the settings of the printing paper.
Normally, the settings of the printing paper follow the STANDARD settings of your printer.
• SIZE
The paper size setting value differs depending on the printer.
• BORDER
– STANDARD: prints according to the settings of your printer.
– NO: prints to the edges of the paper.
– YES: prints with borders.
• PHOTOS PER SHEET
The setting value differs depending on the selected paper size and the printer.
Touch the desired settings on each screen above. Touch to return to the “PRINT” screen and to complete
the settings.
Printing in the “PRINT”/“PRINT ALL”
/“INDEX PRINT” mode
Printing in the “MULTI PRINT” mode
Tip
If you change the paper settings, these changes will be kept until you finish direct printing.
Next time you connect your m:robe to the printer, the paper size settings will be the STANDARD settings.
STANDARD
PAPER
NO
YES 210mmRoll
L
STANDARD
SIZE / BORDER
MAX
PAPER
MIN
210mmRoll
L
STANDARD
SIZE / PHOTOS PER SHEET
00MR500i_E.book Page 92 Thursday, November 4, 2004 6:22 PM