One Stop Gardens 98197 - Manual (Page 11)

Page 11 SKU 98197 for technical questions, please call 1-800-444-3353.
ward direction. If the brushes move
in both directions, then the Drive Pin
is jamming inside the Ratchet Gear.
Make certain that the gear is clean
and greased adequately.
replacing brushes
Oil Bearing
here
figure 12
1. Replace Brushes one at a time to
avoid misplacing right and left-hand
side gearing.
Remove the Hopper Bag (12).
2.
Tip the Sweeper back on its housing. 3.
Do not remove Hex Bolts which fas-
ten the Double Brush Retainers (40)
to the Brush Shaft (39).
Loosen the Hex Bolts (73) and Hex
4.
Lock Nuts (60). Slide the Brush out
of the retainers, making note of the
position of the bristles-see Figure 12.
Install new Brush, making certain
5.
overlapping bristles are positioned
the same as before.
please read tHe fOllOwing
carefully
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROvIDED THE PARTS LIST AND
ASSEMBLy DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLy. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANy REPRESENTATION OR WARRANTy OF
ANy KIND TO THE BUyER THAT HE OR SHE
IS qUALIFIED TO MAKE ANy REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANy PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN By CERTIFIED
AND LICENSED TECHNICIANS, AND NOT By
THE BUyER. THE BUyER ASSUMES ALL RISK
AND LIABILITy ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
record product’s serial number Here:
note: If product has no serial number,
record month and year of purchase
instead.
note: Some parts are listed and shown for
illustration purposes only, and are not
available individually as replacement
parts.