Recording, Normal recording, Skipping unwanted scenes during recording – Sylvania SRC2319 User Manual

Page 20: Otr (one touch recording)

Advertising
background image

- 20 -

EN

1K09

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)

You can ONLY watch the same TV program that is
being recorded.

1

Select the channel to be recorded

Press the number buttons on the
remote control or the CHANNEL
K

or L button.

Remember: If the TV/VCR is con-
nected to a cable box or satellite
box, the TV/VCR must be on CH3 or CH4, then the
channel to be recorded must be selected on the cable
box or satellite box.

2

Select the tape speed

Press the SPEED button to select
the desired tape speed (SP/ SLP).

3

Begin recording

Press the RECORD button.

4

Stop recording

Press the STOP button when recording is completed.

NORMAL RECORDING

Press the PAUSE/STILL button to
temporarily stop recording.
Press the PAUSE/STILL or
RECORD button to resume record-
ing.
NOTES:

After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape damage.

If “CLOSED CAPTION (ON)” is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.

SKIPPING UNWANTED

SCENES DURING RECORDING

CH 10

SP

REC

SP

PAUSE

SP

OTR (One Touch Recording)

This function enables you to set a recording length
simply by pressing the REC/OTR button on the
TV/VCR.

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)

NOTES:

This function CANNOT be done from the remote
control.

Recording starts immediately when the REC/OTR
button is pressed.

When the REC/OTR button is pressed 18 times, the
TV/VCR returns to the Normal Recording mode.

RECORDING

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP
mode
(Standard Play) or SLP mode (Super Long
Play).
The table below shows the maximum recording/play-
back time using T60, T120 or T160 tapes in each
mode.

Note: You can play back a tape recorded in LP mode
(Long Play).

Tape Speed

Recording/Playback Time

Type of tape

T60

T120

T160

SP mode

1 hour

2 hours

2-2/3 hours

SLP mode

3 hours

6 hours

8 hours

ERASE PREVENTION

You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.

If you decide to record on
the tape again, cover the
hole with plastic tape.

Tab

Transparent Tape

NOTE: This unit will ONLY record and view the same channel.

T5407UH/7408UJ.QX33 03.1.8 4:14 PM Page 20

Advertising
This manual is related to the following products: