Quantum Instruments DLT 7000 - Manual (Page 213)

SCSI Commands
Quantum DLT 7000 Tape System 5-109
MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)
Table 5–52 MODE SENSE Page Descriptor - Field Descriptions
Field Name Description
PS Parameters Savable. When 0, the supported parameters cannot be saved
(savable pages are not supported). When set to 1, it indicates that the page
can be saved in nonvolatile memory by the drive.
Additional
Page Length This field indicates the number of bytes in the page. Note that this value does
not include bytes 0 and 1. The length is returned on MODE SENSE and must
subsequently be set to the same value when performing MODE SELECT.
Page codes and pages that are supported are:
Page Code Description SENSE / SELECT Section
00h No Requested Page SENSE ---
01h READ / WRITE Error Recovery Page BOTH 5.10.3.1
02h Disconnect / Reconnect Page BOTH 5.10.3.2
0Ah Control Mode Page BOTH 5.10.3.3
0Fh Data Compression Page BOTH 5.10.3.4
10h Device Configuration Page BOTH 5.10.3.5
11h Medium Partition Page BOTH 5.10.3.6
1Ch TapeAlert Page BOTH 5.10.3.7
3Eh EEPROM Vendor Unique Page BOTH 5.10.3.8
3Fh All Pages (Except EEPROM) BOTH ---