QUAD Vacuum Tuber Amplifier Systems QUAD II-FORTY - Manual (Page 8)

designed by valve supremo, Tim deParavicini,
the Quad twenty-four P is a stunning addition
to the range. designed holistically with the
power and pre-amplifiers, it brings an entirely
new dimension to vinyl listening
QC-phono stages
The Quad
For the analogue purist, the combination of a good valve
amplifier and a good turntable is the closest possible approach
to the original recording.
There are two options for adding such functionality to our
valve pre-amplifiers.
A solid-state module is available for the standard QC-twenty-
four pre-amplifier (known as the QC-24 phono stage) which
allows direct connection of a turntable with an internal
switch to change between moving coil and moving magnet
cartridges. This can be fitted as standard or added later.
For the connoisseur however, there is the Quad twenty-
four P dedicated valve phono stage. This has been
designed for Quad by valve supremo Tim deParavicini
- probably the finest valve amplifier designer in the
world today. It has been voiced by the finest ears in the
industry and will add an entirely new dimension to your
enjoyment of vinyl recordings.
This unit features a moving magnet/ moving coil toggle
switch on the rear, and a choice of direct full level output,
or a variable level output if you wish to connect directly
to a power amplifier.
15 14