Quantum REHAB 610 - Manual (Page 28)

28 www.quantumrehab.com Quantum 610
V . C O M F O R T A D J U S T M E N T S
2. Loosen the jam nut.
3. Turn the setscrew counterclockwise to raise the front
of the foot platform or clockwise to lower the front of
the foot platform.
4. Tighten the jam nut to secure the setscrew.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 24.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 25.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Heavy Duty Drop-in Leg Rests
You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 26.
Figure 24. Swing-Away Footrests
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE LEVER
Figure 26. Heavy Duty Drop-In Leg Rests
ADJUSTMENT
BOLT
LEG REST
ADJUSTMENT SCREWS
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 25. Elevating Leg Rests
RELEASE LEVER A
LEG REST
EXTENSION
LEG REST HANGER
LEG REST EXTENSION