1 introduction, 1 evm features, 2 general description – Texas Instruments SLUU477 User Manual

Page 2: 3 i/o description, 1introduction 1.1 evm features

Advertising
background image

Introduction

www.ti.com

1

Introduction

1.1

EVM Features

Evaluation Module for bq24210

800mA, Single-Input, Single Cell Li-Ion Battery Solar Charger with Power Path

Resistor-programmable setting for charge current and input voltage dynamic power management

LED Indication for Status

Test Points for Key Signals Available for Testing Purpose – Easy Probe Hook-up

Jumpers Available – Easy to Change Setting

1.2

General Description

The bq24210 series of devices are highly integrated Li-ion linear chargers devices targeted at
space-limited portable applications. The high input voltage range with input overvoltage protection
supports low-cost unregulated adapters. The input voltage regulation loop with programmable input
voltage regulation threshold make it suitable for charging from alternative power sources, such as solar
panel or inductive charging pad. The IC has a single power output that charges the battery. A system load
can be placed in parallel with the battery as long as the average system load does not keep the battery
from charging fully during the 10 hour safety timer.

The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge
phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an
internal temperature threshold is exceeded.

For details, see BQ24210 data sheet (

SLUSA76

).

1.3

I/O Description

Table 1. I/O Description

Jack

Description

J1–VBUS

Positive input

J1–GND

Negative input

J2–BAT

Charger output

J2–GND

Ground

J2–TS

Temperature qualification input

J3-GND

Ground

J3-VDPM

Programs the input voltage regulation threshold

J3-CHG

Charge status indication

J3-EN

Chip enable control

J3-PG

Power present indication

J4-ISET

Programs the fast-charge current setting

J4-VTSB

TS bias reference voltage pin, regulated output

J4-GND

Ground

2

800mA, Single-Input, Single Cell Li-Ion Battery Solar Charger with Power Path

SLUU477 – December 2010

Submit Documentation Feedback

© 2010, Texas Instruments Incorporated

Advertising