Teac AQ-VU - Manual (Page 2)

total recording time
ID 1
event 1
level trigger point
level trigger threshold
trigger recording time pre-trigger time
Stand-alone unit (not requiring PC)
Synchronous recording and play-back
Perfectly synchronized
Analog trigger function
Small and lightweight (2.3kg/5.07lb)
Extended recording time (5 hours or continuous record)
1ch 2ch 3ch 4ch
LAN
It can record video and analog data without PC connection.
Small footprint allows use in confined spaces.
The recording and the recorded data can be easily monitored at the recording site.
Perfectly synchronized between the video and data even after the extended
recording. Accumulation delay time is zero *
( Video and analog signals are recorded as a set frame, preventing accumulation
delay time. )
Small, portable, compact package allows easy use of AQ-VU in the field
(2.3kg/5.07lb). Low power consumption. It runs on either DC 10 to 17 volts or AC
power sources. Power for camera is supplied, allowing for mobile environments
such as vehicles, trains, etc.
5 hours recording time with 40GB HDD
pack. (10 hours recording time with 80GB
HDD pack) Endless recording mode
allows use for extended time monitoring
such as surveillance etc.
Built-in LCD display
4 channels video and analog data
AQ-VU is capable of synchronously recording up to 4 channels of video camera data and up to 4 channels of analog data. The
recorded video and analog data are stored in the HDD pack and they can be synchronously played back. The video is recorded as
fast as 60 frames per second per channel in Motion-JPEG for smooth high resolution. The number of recording channels in both
video and analog can be freely selected based on application needs. The event outbreak time can be easily managed. The accessory
viewer software allows play-back of the recorded video and analog data synchronously on PC.
It can record a video with various synchronized measurement data using LX-100 series.
4 channels synchronous video and analog data recording
Quickly verify the recorded video and analog data on-site with 6.4" LCD monitor
Video Wave data
Analog Motion-JPEG
Motion-JPEG
with 60 fields/sec max
Analog Input ON/OFF
Synchronous play-back
of recorded video
and analog data
4ch 4ch
High-resolution recording
Synchronous recording
and play-back
Monitoring in the field
Monitoring at the desk
Synchronous
video and data
recording
Removable HDD Pack
(USB Interface)
Possible to control and monitor via Ethernet
HDD Pack
Search and data edit on PC
Network Monitoring
Connecting the HDD pack to PC, the video and analog data can be synchronously
played-back using AQView software. The search and data edit is simple and easy
using AQView software.
* AQ-VU screen on the catalogue is simulated graphic.
* Sync accuracy +/- frame (in one video channel mode)
Level trigger allows recording before and after the event. The HDD space is used
efficiently and results in quick and easy search operation.
NTSC Camera
(example)
Vibration
Video
Pressure
Strain
Weight
Temperature
Displacement
etc.
Video x4
Analog data x4
Noise
* Sampling frequency is 2 kHz,
so the band-width is 1 kHz or less.
*
Controlling and monitoring from the desk
Using AQ-Net which is provided as an option, video
and analog signals can be monitored via Ethernet.
AQ-VU can be fully controlled via network.
Also downloading data files is possible.
Recoding and downloading are independent, so
downloading data has no effect on recording.
Supported popular
software format
FlexPro7 Professional ( waveform only) NI DIAdem 10 ( Video and waveform) DADISP/2002 ( waveform only)
* The analysis software is other selling
32ch synchronous recording
Cables and optional viewer software screen
Using LX-100 series data recorder, it can synchronously record up to 32 channels
of data. By synchronizing AQ-VU with LX-100 series data recorder, a variety of
data measurements are possible.
LX-100 series
Spectrum analysis
Peak analysis
Waveform
example
Bar meter
Video viewing : 4 channels per screen or full screen viewing ( selected channels )
Waveform / Bar meter : 4 selectable waveform or bar meter ( overlay )
The data can be
transferred to a file in
TAFFmat format.
The video data can be
transferred to a file in AVI
format.
The video at mouse
cursor position can be
played-back
An event mark can be set
during the recording and
play-back
AQ-Net
100bese/T
Ethernet
TCP/IP
БС­ЦХ
OPTION OPTION
Developed by Weisang GmbH Developed by National Instruments
Please contact each distributor in your country
* Downloading data file takes time longer than recording time.
* Video update timing is adjusted automatically.
Developed by DSP Development Corporation
Example of Production Line
(Commercial product)
This is example for monitoring SMT machine using four cameras and accelerometers.