Technicolor - Thomson 28DT68L - Manual (Page 12)

television set
sound adjustments
12
Balance
Select the Balance line (red key).
Balance the sound between the left and right channels.
Repeat the same procedure to select and successively adjust the
Bass and Treble.
Sound Auto/Stereo Mono
Effect Normal Wide
Balance
Bass
Treble
LOUDSPEAKERS HEADPHONES AV
Press briefly
The following menu is displayed :
HEADPHONES is selected.
If this is not the case, select the Contents line with the red
button and HEADPHONES with .
Select the Headphones line (red key).
You can then adjust the volume for the headphone.
This operation also sets the output level of the HIFI
jacks (CINCH).
Note : When the transmission is multilingual (DUAL) or an
AV programme, the following menu appears. It is possible
to select Sound 1 or Sound 2 in the headset.
Select the Source line:
then select Sound 1
or Sound 2
The sound available at the AV1 and AV2 outputs must be
adjusted according to the type of device connected.
Press briefly.
The following menu is displayed :
AV is selected.
If this is not the case, select the Contents line with
the red key and AV with .
Select the AV Device line (red key).
Then selected Stereo = stereo VCR
Mono = mono VCR
Selecting Stereo permits simultaneous recording of both
languages of a bilingual programme on a stereo video
recorder. Sound 1 on the left track and Sound 2 on the right
track.
Press to remove the menu from the screen.
Source Sound 1 Sound 2
Headphones
AV Device Stereo Mono
LOUDSPEAKERS HEADPHONES AV
AV Device Stereo Mono
LOUDSPEAKERS HEADPHONES AV
HEADPHONES
AV
Headphones
Headphones
LOUDSPEAKERS HEADPHONES AV