Triax DVB 75SI - Manual (Page 19)

TRIAX DVB 75 SI
19
'LVSOD\FKDQQHODQGVDWHOOLWHLQIRUPDWLRQ
>JUHHQ@
When the [green] button of the remote control is
pressed, a window containing information about the
basic data of the selected channel will be displayed.
These data include e.g. the name of the satellite,
transponder data, various PID numbers, signal
strength and quality.
The window will disappear when the [green] button is
pressed again.
&KDQJHWRSUHYLRXVFKDQQHO>EDFN@
You can change between the last two channels watched by pressing
the [back] button.
7HPSRUDU\LQWHUUXSWLRQRIVRXQG>PXWH@
By pressing the [mute] button of the remote control you can
temporarily switch off (mute) the sound. It is a useful function when
the telephone rings in the middle of the most ear-splitting action
movie.
A crossed-out loudspeaker symbol is displayed during muting.
You can switch the sound back on by pressing the same button
again.
 &KDQJHEHWZHHQ79DQGUDGLRSURJUDPPHV>795@
With the [TV/R] button of the remote control you can change
between the TV and radio programme lists of the DVB 75SI. At the
same time you will change between TV and radio reception.
The operation is the same of the two programme lists but during
reception of radio programmes a black TV picture is shown. Only the
channel selection bar is displayed at the bottom of the screen.
16:9
16:9 format
A / B
Several audio
tracks
Right mono
Left mono
Digital Audio
Coded channel
Subtitles
TxT
Teletext
Banner icons
and meaning.