TechniSat TechniBox VIACAM - Manual (Page 38)

This menu differs from the Transponder menu only in terms of the list item Service ID .
> Proceed as described in Point 7.7.3 above.
> Use the
up/down arrow
keys to mark the entry
Service ID
.
> Use the numeric key pad to enter the Service ID number.
> Confirm with the OK key.
7.8 Conditional Access
This entry provides you with access to the sub-menus of the VIACCESS card, when inser-
ted, or of the CA modules in slots A or B, when inserted. Use the
arrow keys to mark the
desired function, i.e. the VIACCESS card or one of the slots, and confirm with
OK.
You can
then obtain information relating to the smart card inserted.
7.9 System Configuration
This menu entry allows you to view all data relating to the specific receiver.
>
Use the up/down arrow keys to mark this entry in the sub-menu Settings .
> Confirm with the
OK
key.
> Use the Back or Menu keys to exit this function.
7.10 Activate factory settings/Delete programme memory
You may at any stage revert to the original factory settings for the LNB. You may also wish to
delete the programme list, which may be outdated, completely before initiating a new search.
Please note that, if you delete all programmes from memory, you will then have to initiate a
search, and you will have to copy your selected programmes from the Total List into the User
List.
>
Use the Menu key to display the Main Menu .
> Use the
up/down arrow
keys to mark the entry
Settings
, which will be shown in
red.
> Confirm with the OK key.
The sub-menu
>Settings
will be displayed.
38
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 38