Texas Instruments PGA309EVM-USB - Manual (Page 19)

www.ti.com PGA309EVM-USB Hardware Setup
3.4 Connecting Power
After the two parts of the PGA309EVM-USB are connected, as shown in Figure 12 , connect the power to
the EVM. Always connect power before connecting the USB cable. If you connect the USB cable before
connecting the power, the computer will attempt to communicate with an unpowered device that will not be
able to respond.
Figure 12. Connecting Power to the EVM
19 SBOU084 – February 2010 PGA309EVM-USB
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated