The Eltron Company PRIVILEGE P600 - Manual (Page 50)

Cleaning the
Upper and Lower
Cleaning Rollers
These rollers receive cards fed from the Input
Hopper and Card Flip. The upper roller has a
coating that collects any loose particles on the
surface of cards. Note that these rollers exist in
Module 1 just after the Card Feed Hopper and
in Module 2 just after the Card Flip.
Cleaning the
Cleaning Rollers
Step 1
Remove any cards from the printer. Open the
printer cover. To free an Upper Cleaning
Roller, gently pull the Spring Clip clear of the
Upper Cleaning Roller pin. Then, remove the
Upper Cleaning Roller.
Cleaning the
Cleaning Rollers
Step 2
Clean the Upper Cleaning rollers with running
water. Then allow the rollers to air dry without
resting the rubberized part on a surface.
42
980179-001 Rev. A
Operation
Figure 2-16
Upper Cleaning
Roller
Upper
Cleaning
Roller
Upper
Cleaning
Roller
Spring
Clip
Spring
Clip