Connections and initial set up, Adding a channel – Technicolor - Thomson DTH8060 User Manual
Page 12
Connections and initial set up
12
Adding a channel
If you want to set up a new channel, use the manual search procedure which will enable you to
add a channel to the ones already set-up on your DVD recorder.The channels already stored will
not be deleted. During the initial installation, if you carried out the automatic installation
described on page 6, you do not need to carry out the steps shown on 12 and 13.
1.
If the main menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Manual Search line using the
or
keys, and press
OK
to validate.
5.
Select your country of residence using the
or
keys on the remote control, and press
OK
.
A set-up window will appear.The Standard line is highlighted.
6.
Select your country’s TV standard using the
key.
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL’) for France,
EURO BG (BGH) for Western Europe.
DKK’ for Eastern Europe.
I for the United Kingdom.
7.
Select the Reception line using the
or
keys, and use the
key to choose the type
of antenna.
•
Reception through external antenna: select Antenna (Ch).
•
Cable reception: select Cable (Ca).
8.
Select the Channel line using the
or
keys.
9.
Press
PR+
to start the Manual search.
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.: Ch 06).
If the channel is encoded, press
AV
to display the pictogram
next to the channel number. In
this case, plug a decoder into the blue AV2 connector of the DVD recorder.
If the picture is poor, select Fine Tuning using
or
and adjust with
PR+
or
PR-
.
10.
When the picture and sound of the channel are good, select the line Save using or ,
and assign a channel number with
PR+
or
PR-
or the
number
keys. Press
OK
to store the
number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press
MENU
to exit the manual set-up.
2_DTH8060_en.qxd 17/08/05 12:21 Page 12