Trimble Outdoors SPSX51 - Manual (Page 79)

SPSx51 Modular GPS Receivers User Guide 77
Configuring the Receiver Settings 7
Configuring the receiver using a web browser
The receiver can be configured using the keypad and display, Trimble SCS900 Site
Controller software, or a web browser. This section describes how to set up the receiver
using a web browser.
Supported browsers
• Mozilla Firefox version 1.07 or later (version 1.50 or later is recommended for
Windows, Macintosh, and Linux operating systems)
• Microsoft Internet Explorer ® version 6.00 or later for Windows operating
systems
Connecting to the receiver using a web browser:
1. Enter the IP address of your receiver into the address bar of the web browser as
shown:
2. If security is enabled on the receiver, the web browser prompts you to enter a
username and password:
The default login values for the receiver are:
– User Name: admin
– Password: password
If you cannot connect to the receiver, the password for the admin account may
have been changed, or a different account may be in use. Contact your receiver
administrator for the appropriate login information.