VIEWSONIC Precision VS11856 - Manual (Page 35)

ENG
ADVANCED OPERATION

2-3-4 Timers
Timer settings
Use ▲ and ▼ to navigate the Timers Sub-Menu (Fig. 2-3-4) Selections.
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
SYSTEM TIME
00100 HRS
FILTER
TIMER RESET
LAMP
TIMER RESET
Fig. 2-3-4
Timers Sub-Menu
YES NO LAMP TIMER RESET
Reset Lamp timer. Reset Lamp timer after each replacement of
new lamp.
This timer is for user’s own tracking purpose; the lamp
warranty time will not be renewed by this act. (See section ???
for lamp warranty details.)
OFF ON FILTER TIMER RESET
Reset filter Timer. Reset filter timer after each cleaning or
replacement of new filter.
SYSTEM TIME
00100 HRS
Total Projector operating time (Operating timer cannot be
changed by user).
2-3-5 High Altitude
Using Projector in high altitude. Projector fan spins faster to accommodate the low-
atmospheric pressure environment.
Use ▲ and ▼ to navigate Selections of High Altitude Sub-Menu (Fig. 2-3-5).
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
HIGH
ALTITUDE
OFF
HIGH
ALTITUDE
ON
Fig. 2-3-5
High Altitude Sub-Menu
HIGH
ALTITUDE
ON
ON: Projector is used in high altitude.
High fan speed mode.
HIGH
ALTITUDE
OFF
OFF: Projector is not used in high altitude.
Normal fan speed mode.