Vivitek VTC-IRLED30HD - Manual (Page 2)

2
LENS ADJUSTMENT
1. Unit contains uninsulated dangerous voltage
within the enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons
2. Only use DC Power Supply
3. Read & Keep these instructions.
4. Heed to all warnings and follow all instructions
carefully.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. install in
accordance with the instructions.
8. Do not install near any heat source such as
radiators, heat resisters, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has to
blades with one wider the other. A grounding
type plug has to blades and a third grounding
plug. The wide blade or the third prong are
provided for safety. if the provided plug dose not
fit into your into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on a
pinched particularly at plugs, convenience
receptacle, and the point where they exit from
the apparatus.
11. Only use attachment/accessories specified by
VITEK.
12. Use only with cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
Unit,
13. Unplug this unit during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel,
Servicing is required when the unit has been
damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the unit, the unit has
been exposed to rain or moisture, does not
operate normally or has been dropped.
15. Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personal.
CAUTION - To reduce the risk of electric shock, do
not perform any servicing other than contained in
these operating instructions unless you are qualified
to do so.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
B BL LA AC CK K BLACK
3
Pick up Element
Effective Pixels
Resolution
Minimum lllumination
S/N Ratio
Electronic Shutter
White Balance
Video Output
Lens
IR LED
Operation Temperature
Power Source
Power Consumption
Dimensions
1/3” Color CCD Image Sensor
768 x 494
480 TV Lines
0 Lux (IR On)
More than 48dB(AGC off)
1/60 to 1/100,000 sec.
AWB
1.0 Vp-p composite, 75 Ohm
4.3mm Included (3.6, 6, 8, 12, 16, 25mm Optional)
30 850nm IR LED’s
14°~122° F (-10°~50° C)
Dual Voltage: 12VDC/24VAC
IR Off: 160 mA / IR On: 340 mA (*At Power Input)
2.36" x 3.94" (60mm x 100mm)
VTC-IRLED30HD
SPECIFICATIONS
* Remember to consider the factors that effect Voltage Drop including wire gauge, quality,
interference and cable length.