Vivitar vivtarr i7 - Manual (Page 62)

62
9) Remember that this setting will be saved by your camera until you manually
change the setting or restore the camera’s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your
camera’s lens. This setting should be adjusted when the environment is lighter or
darker than normal.
When the environment has more light than is needed, reduce the exposure setting
(by using the negative - count) to reduce the amount of light allowed into the lens by
your camera.
If the environment has less light (darker) than is needed, increase the exposure
setting (by using the positive + count) to increase the amount of light allowed into the
lens by your camera.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT
or RIGHT direction control button to scroll and select the Light
Exposure menu.
3) Press the UP or DOWN direction control button to scroll through the menu
options.
4) Press the SET button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT
or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be saved by your camera until you manually
change the setting or restore the camera’s default factory settings.
ISO Menu
The ISO menu allows you to set the level of sensitivity that your camera has to light in
the surrounding environment. When the ISO level is increased, the image sensor in
your camera will be more sensitive to light and allow you to capture images in lower-