Power on – Vivotek VS3102 User Manual
Page 16
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
15
Power on
Make sure all cables are correctly and firmly connected before turning on the Video Server. Turn on
cameras, sensors, alarm devices, and then attach the power adaptor of the Video Server to the electric
power socket*. After the POST (power-on self test) is complete and the result is successful. At this stage,
network speed and video modulation type are automatically detected. After addressing procedure is
completed, the Video Server is ready. If the detection of video modulation fails, Administrator may
change the setting on the configuration page. Refer to the configuration section for further information.
.
Connect the jack of the power adapter to Video Server prior to plugging the utility end into the
utility power socket. It will reduce accidental electric surge shock.