Vestax PDX-2000MkII - Manual (Page 8)

7
r Insert the head shell into the front part of the tone arm. Turn
the looking ring in the direction shown below until the head
shell is firmly fixed in place.
50mm
e The overhang of your cartridge needs to be adjusted to best
suit the A.S.T.S tone arm. For best tracking and stylus pressure
a distance of 50mm (as shown) should be set.
To avoid premature damage to the stylus take care to
avoid touching it during any adjustment(s).
Power Connection
• Do not expose this unit to direct sunlight, or install in an area
that is typically humid and/or damp.
• Place this unit on a stable, horizontal service in order to limit
vibration and poor tracing/action of the tone arm.
• Locate this unit at a suitable distance from any speakers so as
to avoid feedback.
• Interference may result from close proximity of an AM/FM
tuner.
Plug in the unit to a power outlet.
INSTALLATION AND CONNECTION
Player Installation
This unit has been manufactured to strict quality and
safety standards. PLEASE ENSURE that you use
the correct power supply as shown on the rear panel
of this device. FAILURE to do so many result in shock
and/or serious damage to this unit and/or users.