VIPowER Portable 3.5 in. External Enclosure VP-9258V User Manual
Page 15
VP-9258V Installation Guide 13
assistance.
(b) If your Operating system is Windows NT, 95 or Mac OS 9.0 or lower, the
drive is not compatible and will not be detected.
Connecting External Enclosure to your PC/
Notebook or Mac
Prior to connecting your External Enclosure to your PC/Notebook or Mac
ensure that your USB 2.0 Host Card Hardware (inside your computer) and driver
software are correctly installed. This is essential to ensure USB 2.0 performance.
1. Ensure that your computer and any auxiliary devices are switched off.
2. Connect the USB 2.0 smart cable between the Enclosure and your PC/Note
book (or Mac).
Notes
(a) 36-pin connection into the rear face of the Enclosure, the USB connection
into an appropriate USB port on your computer.
(b) If you have a hub integrated into your system, do not connect until the
installation is completed.
3. Ensure that the adapter is switched on.
4. Switch on the Enclosure followed by your computer.
Installation procedure
1. Prior to installation note that there is no USB interface device icon displayed.