VIPowER VPM-6228H - Manual (Page 27)

VPM-6228H USER MANUAL 27
4-2 Disconnect the USB 2.0 External Enclosure VPM-6228H
from Computer
Windows 98:
Step1:
Double click the green Unplug or Eject hardware icon in system
tray and click the drive that you want to remove and click on
[STOP].
Step2:
When the system prompts ‘Confirm device to be stopped’, click
[OK]. When the green arrow icon disappears, you may safely
unplug the USB cable from the USB port of computer.
Windows Me/2000/XP
Step1:
Double-click on the [Unplug or Eject Hardware] icon in the system
tray. A dialog box appears.
Step2:
Highlight the [USB Mass Storage Device] in the dialog box, click
[STOP]. Choose the USB 2.0 External Enclosure VPM-6228H
that you want to disconnect, then click [STOP] again on the next
screen.
Step3:
Wait a few seconds until the system prompts “You may safely
remove this device”. Then, disconnect the USB 2.0 External Drive
from the computer.