Vivotek ST3402 - Manual (Page 34)

3-33
Figure 3-12 Internet Proxy Settings
Backup Settings:
In this setting, you can select the directory, maybe a remote hard disk, for the media
database backup; as well as the backup size of your backup media.
Backup Location Select:
This window provides the settings for backup and the deletion of media datamedia
database. You can select the check box to direct which channels need to be backed
up. You can also click the “Delete” button on the right to delete the media datamedia
database corresponding to the selected channel. Several kinds of backup status
information will be shown for each channel. Normally the status shows the time of the
last backup, which indicates the time you last backed up to the dedicated media. “No
Data” means that there is no media data recorded for this channel. “All Backup”
means all the data in this location have been backed up. “First Backup” means there
are media data recorded for this location and there has not been any backup
operation prior. Please refer to Section
X
3.7.3
X
for the activation of backup operations.
Network Account:
As shown in
X
Figure 3-13
X
, if you want to set the record path to the network drives, you
should enable the option “Account to Access Network Drive”, and give the local user’s
name, password and network domain (or Host Name / IP). To backup data to network
driver, you also need to setup the account.
Check here to enable proxy server
Set the port
Check here to enable IP filter
Enter IP address here to add
Add an IP address to list
Delete an IP Address from list
IP address list