VBrick Systems ETHERNETV V4.4.3 - Manual (Page 50)

38 © 2009 VBrick Systems, Inc.
port (10021 for example), then you start the FTP Guardian service. It binds to port 21 and all
incoming FTP clients communicate using a secure front that proxies the calls to IIS on port
10021. Be aware that this add-on, for Windows servers only, is not sold or supported by
VBrick. It requires a server wrapper and additional .dlls.
T To install FTP Guardian:
1. Go to http://www.tcpdata.com/ftpg_license.shtml
2. Click and run
Download ftp Guardian Server Wrapper - 600K
on the VOD server.
3. Click
Download SSL Libraries - 380K
on the VOD server.
Then open the .zip file and copy libeay32.dll and ssleay32.dll into C:\Program Files\ftpgs
Creating a VOD-WM FTP Server
If you are using a VOD-WM-Enterprise or VOD-WM-Standard (Microsoft Windows Media)
server, you must install and configure a standard FTP server on the VOD-WM server as
explained below. (For more about Microsoft Windows Media servers see ETV VOD Servers
on page 6.)
T To create a Microsoft Windows Media FTP server:
On the Microsoft Windows Media Server :
1. Install the FTP server.
2. Set the default FTP directory to the Microsoft Windows Media Server's default
Publishing Point directory.
3. Create and configure an FTP user account with full permissions (read/write, rename/
delete etc.) on the directory specified above. If using the VBrick default, this account's
user name is
vbrickuser and the password is vbrickuser . Hint: use the settings of the
anonymous account as an example.
4. Verify that the directory specified in Step 2 above is set to allow the FTP user account
full permissions.
On the Portal Server :
5. When the Microsoft Windows Media Server is created or modified, specify the user name
and password created in Step 3 above in the
FTP User Name
and
FTP Password
fields on
the
Add/Modify VOD/FTP Servers
page.
Creating a VOD-D FTP Server
If you are using a VOD-D (Darwin) server, you must install and configure a standard FTP
server on the VOD-D server as explained below. (For more about Darwin servers see ETV
VOD Servers on page 6.)
T To create a Darwin FTP server:
On the Darwin Server :
1. Install a standard FTP server on port 21.
2. Set the default FTP directory to the Darwin Server's Media Folder directory (also called
the Publishing Point) or create a virtual directory of the FTP root pointing to the Darwin
server's Media Folder.
3. Create and configure an FTP user account with full permissions (read/write, rename/
delete etc.) on the directory created above. If using the VBrick default, this account's user
name is
vbrickuser and the password is vbrickuser . Hint: use the settings of the
anonymous account as an example.