Venturer PDV28420C - Manual (Page 13)

CONNECTIONS
E-12
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not
included) as shown:
Make sure you connect the cable
from the other equipment (AUDIO
IN) to this unit (AUDIO OUT).
To AUDIO
OUT jacks
To AUDIO IN jacks
To PC AUDIO OUT jack
To PC connector
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA
connector from your computer to
the 15-pin D-SUB PC/VGA input
on this unit using a monitor cable
and audio cable (not included) as
shown.
Make sure you connect the cable
from the computer (PC Connector
and PC AUDIO) to this unit (PC IN
MONITOR / VGA and AUDIO).
NOTE
When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution
supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support
DVD players up to a maximum resolution of 1080i.