VIEWSONIC PC V35 - Manual (Page 79)

72 ViewSonic Pocket PC V35
2 Unscrew the tip of your stylus. Use the tip to press the reset button on the
side of your V35.
Restoring Factory Defaults
In some cases, you may need to restore your V35 to the factory default settings
by clearing the memory (RAM) from your V35. For example, you should clear
the memory:
• When your V35 does not respond after being reset.
• When you forget your password.
Clearing the memory means all data you have entered in RAM, including all
files, system settings, and additional programs you have installed, will be
erased. (Programs installed to ROM at the factory are not affected.)
CAUTION:
• To ensure the integrity of your data should it be necessary to clear
the memory, you are advised to regularly back up to your PC (using
ActiveSync), or to an optional SD card (using the backup
application). For more information on backing up data, see “Backing
Up Data” in Chapter 3.
• Do not push the battery switch unless it is necessary.
V35_UG.book Page 72 Monday, October 28, 2002 4:56 PM