Vivitar DVR 380 - Manual (Page 11)

10
Powering ON/OFF Your Digital Video Recorder

Make sure the batteries have been inserted properly into your digital video recorder.

If your camcorder comes with a rechargeable lithium battery, make sure it is fully charged
before the first use.

Make sure an SD card has been inserted into your camcorder.
(SD card up to 16GB - SD Card not included)
Powering the camcorder ON
Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture mode to start.
Powering the camcorder OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder
OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Note: When there is insufficient battery power, a “Low Battery” message will appear on the LCD
screen. The digital video recorder will automatically power off a few moments later.
Auto Power Saving
Your digital video recorder has an Auto Power Off feature that will automatically turn off the
camcorder if it has not been in use after 3 minutes.