VIEWSONIC Wireless Presentation Gateway WPG-350 VS12526 - Manual (Page 51)

46
‘Enrollee’. Default and recommend setting: Registrar.
Configure via Push
Button Click “Start PBC” to handshake with other device with
WPS function.
NOTE 1: When WPG is in ‘Registrar mode’, another
wireless device must set to ‘Enrollee’ mode; and vice
versa.
NOTE 2: When no WPS connection is established
within 2 minutes, this mode will be turned off.
NOTE 3: You can also press ‘WPS’ button located on
the front of wireless presentation gateway to enter WPS
mode, too.
Configure via
Client PinCode Input the PIN code (up to 8 characters) of the
WPS-enabled device here, then click ‘Start PIN’ button,
then WPG will establish connection with it
automatically.
WPG-350 ViewSonic