Multi-level security arming – Viper 1000 Model User Manual

Page 13

Advertising
background image

14

© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .

When armed, your vehicle is protected as follows:

Light impacts will trigger the Warn Away

®

signal. When

triggered, the siren will chirp and the parking lights will flash

for a few seconds.

Heavy impacts will trigger the system. The triggered

sequence is between 1-180 seconds of constant siren and

flashing parking lights.

If a door is opened, the system will immediately start

chirping the siren and flashing the parking lights. Three

seconds later, the siren output changes to a continuous blast.

This progressive response gives you time to disarm the sys-

tem with your transmitter if you inadvertently open the door

while the system is armed, while still providing an instant

response (even if the door is immediately closed).

Turning on the ignition key will trip the same two-stage

response as opening a door.

The optional starter kill prevents the vehicle’s starter from

cranking.

multi-level security arming

Multi-Level Security Arming allows you to select which of the

security system's inputs or sensors will be active and which will

be bypassed at the time that the system is armed. (See the

Table

of Zones

section of this guide.) Pressing

again within five

seconds of arming the security system will activate the Multi-

Level Security Arming feature. Each time

is pressed again, a

different security level is selected. The different security levels

can be selected as follows:

Advertising