Loading the battery, Charging the battery, Viewsonic 2 3dv5 – VIEWSONIC VS13782 User Manual
Page 7
ViewSonic
2
3DV5
Loading the battery
1
Press the “PUSH” button,
and then pull the battery
cover downwards to
remove it.
2
Place the battery into
the compartment. Align
the + and - metallic ends
carefully.
3
Replace the
battery cover.
Charging the battery
1
Slide the USB switch downwards to
reveal the USB connector.
2
Connect the USB connector to a USB port of
a powered PC and the charge will begin. Use
an extension cable if necessary.
The LED light turns amber when the charge is
in progress. After the charge is complete, the
LED light will turn green.
Before charge:
Power off the unit first and make sure the Li-ion
battery is installed.
Make sure your PC is powered on during the
charge.
It is recommended to charge the battery for at
least 8 hours before the first time usage.
LED light
Note that the + and - metallic contacts must be aligned with the corresponding contacts
in the compartment.
1.1
1.2