VocoPro Voco user guide portable speaker - Manual (Page 15)

14
1. INPUT SELECTOR - Use this button to turn on the radio. This button toggles through all the INPUT channels (DISC,
TUNER, AV1, AV2) for available INPUT SOURCES. Press the button until the TUNER light is on.
2. Preset Buttons - Use these buttons to program and select the radio preset stations. To program a station, hold
down a number button for 3 seconds while on the desired station. The screen will display the number once it has
been programmed. To jump to a preset station simply press that number button.
3. AM/FM button - Use this button to toggle between AM and FM radio modes.
4. AUTO button - The AUTO search button automatically scans through all stations and stops when a station’s signal is
strong and clear.
5. < PRESET > buttons - Use these buttons to search through the stations that you have programmed as presets.
Use the < button to search backwards and the > button to search forwards.
6. < SEARCH > buttons - Use these buttons to manually search through all radio stations. The tuner must be set to
FM mode to search through FM radio stations and it must be set to AM mode to search through AM radio stations.
Hold the preset buttons down to activate rapid scan.
7. ST/MO button - Select between Stereo (ST) and MONO (MO) audio output modes.
AM/FM Tuner descriptions
GIG MAN PLUS PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM
MUSIC EQ
MUSIC VOLUME
AV2 INPUT
PLAY
STOP PBC
AM/FM PRESET SEARCH AUTO ST/MO
PREV NEXT B-SCAN F-SCAN MUTE L/R
EJECT
DIGITAL KEY CONTROLLER
VOCAL
CANCEL
VOCAL
PARTNER
REPEAT
EQ ON
EQ OFF
PAUSE
DISC
TUNER
AV1
AV2
INPUT
POWER +12dB
0dB
-12dB
+12dB
0dB
-12dB
60Hz 200Hz 400Hz 1KHz 3KHz 6KHz 16KHz
60Hz 200Hz 400Hz 1KHz 3KHz 6KHz 16KHz
HEADPHONES KEYBOARD GUITAR
MIC VOLUME
MIC EFFECTS
VOL2 VOL1 MIC2 MIC1
BASS TREBLE ECHO REPEAT DELAY
1 2 3 4 5 6 7 8 9 10 +10
VOLUME VOLUME VOLUME
PRESETS
1 2
3 4 5 6 7
Front Panel