Verizon DMS 100 - Manual (Page 27)

51 50
Speed Dialing Code Charts
The following charts are provided for you to list your Speed Dialing
codes. The length of your individual Speed Dialing list is determined
by your switch type. Your switch type can be found on the front cover
of this guide. Be sure to use the Speed Dialing list that corresponds
to your switch type. The instructions for setting up a list and making
calls using Speed Dialing can be found below and also on page 29
of this guide.
To establish or change your Speed Dialing list:
Ī
Lift the receiver and listen for dial tone.
Ī
Press and listen for dial tone.
Ī
Press .(GTD-5 only, skip this step in all other switches).
Ī
Press the Speed Dialing 1-digit code number to be programmed
(see pages 50-51).
Ī
Dial the telephone number to be assigned to the code.
Ī
Listen for confirmation tone.
Ī
Hang up.
Ī
Repeat steps for each Speed Dialing code number to be pro-
grammed.
To make a call using Speed Dialing:
Ī
Lift the receiver and listen for dial tone.
Ī
Press (all switches) and then dial the Speed Dialing code
number (see pages 51-52).
Ī
You will hear the called number ringing.
Ī
Wait for party to answer.
Name Code Telephone Number
2
3
4
5
6
7
8
9
GTD-5, DMS 100 and DMS 10 Speed Dialing List