Vivitar VIVICAM 8690 - Manual (Page 7)

6
Prepare Your Camera for use
Install batteries
Your camera requires three AAA batteries (alkaline batteries recommended). Please refer to the
following installation instructions:
1.
Open the battery compartment on the side of the camera.
2. Insert the alkaline batteries correctly, with the correct polarity as shown on the battery cover.
3. Close the battery compartment.
When the Low Battery icon
and “Low Battery” message flashes on the LCD screen, you need to
replace your camera‟s batteries. If you do not have an SD memory card in the camera, you will need to
download the test photos you have on the camera before switching off the camera.