VuPoint Solutions VuPoint DV-DA1-VP - Manual (Page 29)

22
3.4.1.5 Monitor Video
Use this option to have your camera not to start shooting a video
until the image within the focusing area is moving.
To set the Monitor Video:
1. Press the joystick up or down
to highlight the Monitor Video
option.
2. Press the joystick left or right
to select between on and off.
When you select on, the camera will automatically start to shoot a
video when the image within the focusing area is moving.
Press in the joystick to confirm and press the Menu button to exit
the menu.
3.4.2 Photo mode
Read this section to configure the settings
in Capture mode.
To access the Photo mode:
1. Turn the camera on and press
the Menu button.
2. Press the joystick left or right to highlight the Photo
Mode.
3. Press the joystick up to enter the Photo Mode setting
menu.
3.4.2.1 Scene
Use this option to select a proper scene mode to take a picture.
To set a Scene: