Vivitar 3615 - Manual (Page 36)

24
Select the item by the Arrow buttons( ) and then press the OK button to confirm.
The cursor skips to the data field as the OK button being pressed. Use the Arrow
buttons(
) to select the desired setting. The cursor returns to the Record menu
automatically when the change is made.
Note: The setting is conserved even if the camera power is off.
White Balance
Select either one of the 5 (Auto, Sun, Shade, Fluorescent, Tungsten) white balance
settings. The Auto white balance is recommended for most cases. For certain critical
circumstances, if the result did not come out as expected, you may manually change to
another white balance type according to the ambient lighting condition.
Select the item by the Arrow buttons(
) and then press the OK button to confirm.
The cursor skips to the data field as the OK button being pressed. Use the Arrow
buttons(
) to select the desired white balance type. Press the OK button again to make
the change. The cursor returns to the Record menu automatically when the change is
made.