Vizio EXES-5000 CPU-55 - Manual (Page 30)

General Purpose Control
Station may be restricted from access to this function. This
function can control other equipments by employing the
Data Transmitting and Receiving Units.
Select the required type of output.
(Mode 1) One-shot make output
Dial
(000 ~ 499, max. of 500 contacts)
and the relay output is made for 1 to 2 seconds.
Example: Door remote and VTR control
Note: Operation performed even when all link cir-
cuits are occupied.
(Mode 2) Make/break output
Dial
(000 ~ 511, max. of 512 contacts)
and the make output is sent out.
Dial
(000-511, max. of 512 contacts)
and the break output is sent out.
(Mode 3) 8 selectable make output and/or decimal output
(A) Unit block number (max. 9)
Dial
and one of the 8 relay outputs is made, and the
condition is indicated numerically. Select the-
required output type.
(B) Unit block number (max. of 64 (99))
Dial
( X
2
and X
2
are unit No., Y
2
is condition No.)
and one of the 8 relay outputs is made, and the
condition is indicated numerically. Select the
required output type.
Example: Destination indication, room condition indi-
cation, ITV control
(Mode 4) 4 decimal digits output
Dial
and 4 decimal digits are indicated.
8 selectable output type indication panel
Decimal output type indication panel
4 decimal digits
Control with one-shot make output
Lamp on/off indication panel
X is unit No. (1~9),
Y Y Y Y is 4 decimal
digits (0000~9999)
(X
1
is unit No., Y
1
is condition No.)
— 29 —