Vidikron VP-5000 - Manual (Page 45)

Operation
Vidikron PlasmaView Owner’s Operating Manual 35
PRE
L
IMINAR
Y
Install
Language: Select Language from the Install Menu, then press or to highlight the
desired language and press MENU. The change takes effect immediately.
DVD/HD1 Input: Select DVD/HD1 Input from the Install menu to specify the signal format on
the DVD/HD1 input. Currently, the only option is COMPONENT.
D-SUB Type: Select D-SUB TYPE from the Install menu to specify the signal format on the
PC/RGB input. Currently, the only option is RGB.
HD Type: Select HD Type from the Install menu to specify the resolution (number of vertical
lines) of the incoming high definition signal, if necessary.
• Choose 1080i for standard digital broadcasts.
• Choose 1035i for Japanese “High Vision” TV broadcasts.
• Choose 540p for compatibility with certain HDTV receivers.
These are the only resolutions that the PlasmaView does not detect automatically.
RGB Type: RGB Type refers to the incoming RGB signal type. Currently, the only option is
AUTO.
HDMI Blk. Level: Select HDMI from the Install menu to adjust the black level of the displayed
HDMI signal. Set it to LOW if blacks appear elevated (dark gray). If blacks appear “crushed”
(too dark), set it to HIGH.
LANGUAGE : ENGLISH
DVD/HD1 INPUT : COMPONENT
D-SUB TYPE : RGB
HD TYPE : 1080i
RGB TYPE : AUTO
HDMI BLK. LEVEL : LOW
VIDEO STANDARD : 3.58 NTSC
BACKGROUND : GRAY
SIDEBAR LEV. : 3
S1/S2 : ON
DISPLAY OSD : ON
OSD ADJUST : 3
ID REMOTE : 1
FACTORY : ON
INSTALL
SEL. ADJ. RETURN EXIT
You must set the Advanced OSD option (in the Function menu) to ON in
order to see all of the items in the Install menu. If you do not, only the
Language and Factory menu items are available. Refer to Advanced
OSD on page 37.
Note