Vivitek D7 User Manual
Page 49
Advertising
DLP Projector – User’s Manual
3.
Remove the two screws from
the lamp module.
4.
Lift the module handle up.
5.
Pull firmly on the module
handle to remove the lamp
module.
6.
Reverse steps 1 to 5 to install
the new lamp module.
While installing, align the
lamp module with the
connector and ensure it is level
to avoid damage.
Note: The lamp module must
sit securely in place and the
lamp connector must be con-
nected properly before
tightening the screws.
– 41 –
Advertising