Verizon One - Manual (Page 112)

© 2006 Verizon
Verizon One User Guide
112
20.2 Important Information About Your
Verizon One Home Network
(cont’d)
Note: Hereafter, the Verizon One
Communications Subsystem will be
referred to as “ Verizon One ,”
“Gateway,” or “Modem.”
Your Verizon One Wireless Home
Network was shipped to you disabled
(turned OFF). Enable (turn ON) your
Wireless Network by:
1. Selecting
Menu on the Verizon One
touch-screen display
2. Select
Settings
3. Select Wireless
The Wireless Network screen on the
Verizon One touch-screen display will also
allow you to create your Wireless Network
Name (called a Service Set ID
or SSID ). The default SSID for Verizon
One is: Verizon One followed by the
last 4-digits of the unit’s serial number
(located below the bar code on the bottom
of the unit). For example: VerizonOne1234.
20.3 Installing Your Verizon One
Home Network
This section explains how to install your
Verizon One Home Network:
• Home Networking System
Requirements – See Section 20.3.1
•
Verizon One LED Indicators – See
Section 20.3.2
•
Verizon One Interface Descriptions
– See Section 20.3.3
• Installing a Wired Network – See
Section 20.3.4
• Installing a Wireless Network – See
Section 20.3.5
• Installing both a Wired and a Wireless
network simultaneously – See Section
20.3.6
20. Home Networking