Getting connected, Connecting – VocoPro VHF-3000 User Manual
Page 11
Advertising
10
1. Connect the AC POWER ADAPTER to the VHF-3000 receiver’s POWER INPUT connector, then plug the ADAPTER
into a compatible AC electrical outlet.
2. Connect the VHF-3000’s receiver to a sound system, mixer or amplifier’s microphone input(s) with ¼” output
jacks. When using a mixer, connect each mic line into a separate channel. This gives you complete control when
mixing the vocals.
Getting Connected
Connecting
LEVEL
V.CANCEL
V.PARTNER
POWER
VOCAL CANCEL/PARTNER
TAPE REC.
TAPE REC.
LOW
HIGH
DSP
REVERB
DSP ECHO
SONIC
ENHANCER
IN
IN
OUT
IN
OUT
VHF-3000
VHF-3000
DUAL CHANNEL VHF WIRELESS MICROPHONE SYSTEM
VOLUME
POWER
VOLUME
RF
RF
CHANNEL 1
CHANNEL 2
Advertising