VIEWSONIC VS12933 - Manual (Page 19)

ViewSonic VOT132 12
Advanced Menu
Advanced Settngs Select the ACPI state used for
system Suspend
Suspend mode [S3 (STR)]
Legacy USB Support [Enabled]
Restore on AC Power Loss [Last State]
► Wakeup Configuration
► Onboard Device Configuration
← Select Screen
↑↓ Select Item
+/- Change Opton
F1 General Help
F10 Save and Ext
ESC Ext
v02.61 (C) Copyrght 1985-2006, Amercan Megatrends, Inc.
Man Chpset Boot Securty Ext
BIOS SETUP UTILITY
Advanced
► Suspend mode [S3 (STR)]
Ths tem s used to set the energy savng mode of the ACPI functon. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before t enterng STR wll be saved n memory, and the computer can quckly
return to prevous state when the STR functon wakes.
► Legacy USB Support [Enabled]
Ths tem s used to enable or dsable the support for legacy USB. If no USB devces are
connceted, BIOS wll automatcally select [Dsabled].
► Restore on AC Power Loss [Last State]
Ths tem s used to set whch state the PC wll take wth when t resumes after an AC power
loss.
►Wakeup Configuration/Onboard Device Configuration
Press <Enter> to go to relatve submenu.