Venturer PLV36220S1 - Manual (Page 12)

E - 11
USING HEADPHONES
• Turn down the volume before
connecting headphones to the unit, then
adjust the volume to your desired level.
• When headphones are connected, no
sound will come from the front
speakers.
NOTE:
Avoid listening to sound at high levels for
prolonged periods of time. This may be
harmful to you and may cause hearing
loss.
CONNECTIONS
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT).
CONNECTING THE AC POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit.
NOTES:
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET,
THEN FULLY INSERT.
• When the AC power cord is plugged in, the unit is
not completely disconnected from the main power,
even when the power is turned off.
• Be sure the AC power cord is disconnected and all
functions are off before making connections.
• Make sure all components are connected correctly.
• When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
• Mains plug is used as the disconnect device. It shall
remain readily operable and should not be obstructed
during intended use. To be completely disconnected
the apparatus from supply mains, the main plug of
the apparatus shall be disconnected from the mains
socket outlet completely.
To AC wall outlet
Headphones
(1/8” [3.5mm]
diameter plug)
To AUDIO IN jacks
To AUDIO
OUT jacks