Visart Technologies 10.4 PORTABLE TV with built-in multimedia Card Player - Manual (Page 14)

TIMER SET
RETURN
VIDEO
TV
MEDIA PLAYER
RETURN
H-POSITION
V-POSITION
TIMER SET
6.1.3 INPUT SELECT
Move horizontally
Move vertically
Timer function
6.1.2 OSD ADJUST
OSD-OFF TIME
OSD-TRANSPARENT
RETURN OSD auto off time setup
OSD Transparency
Return to Menu
TIMER SET is to set up the clock's On/Off time. It appears in the upper right corner of the
screen. Timer is in function only "Timer On" is selected. Press or to turn TIMER on
or off. Press or to switch between ON, OFF, TIME, TIMER ON and TIMER OFF.
When timer is on, three selections will be displayed on the screen, including ON (On
Time)
OFF (Off Time) and TIME(Current Time). Press numbered keys to adjust to the
correct time. If the current time is 13:15:41, press 1, 3, 1, 5, 4, 1 as the arrow flashes.
Confirm it after time adjust.
ON: System is off, internal clock still runs, when it's time to start, system will be
automatically turned on
Off: System is on, when it s time to shut down, system will be automatically turned off.
TIME: Current time
When Timer is set to NO , auto-timer is off.
1.Press ENTER / MENU to enter submenu, then press ENTER / MENU to enter OSD
ADJUST (or press )
2.Press
to highlight your choice.
3.Then press ENTER to highlight, press to change settings. Or Press ENTER for
options
Note: To ease the operation, the second function of multifunction buttons will be used
(up, down, left, right at menu setting)
representing by
Operation under highlighting the variable
BRIGHTNESS reduce/increase the variable
CONTRAST reduce/increase the variable
SHARPNESS reduce/increase the variable
SATURATION reduce/increase the variable
HUE reduce/increase the variable
COLOR
TEMPERATURERreduce/increase the variable
RESET defaults recall
RETURN return to Menu
- 12 -