Vivitar VS18B - Manual (Page 14)

13
Capturing Photos
TAKING INDIVIDUAL PHOTOS
You can compose your shot using the LCD screen. Hold the camera steady and press the shutter button. A beep
will sound and
the red LED indicator on the front of the camera will light up, indicating that the photo has been taken.
Do not move the camera until you hear the beep. Moving the camera while taking the picture will cause the photo to
blur.

After each photo is taken the number of photos left to shoot at this resolution is displayed at the bottom
left of the LCD screen.

If the level of brightness is too low, two quick beeps will sound, indicating that the photo cannot be taken.

If there is not enough battery power, two quick beeps will sound, indicating that the photo cannot be taken.

If the camera‟s memory is full, two quick beeps will sound, indicating that photos cannot be taken. In order
to continue taking photos you will need to download the photos on the camera to the computer and then
delete them from the camera.